[Spm] Mica/punches

Sat Nov 10 09:39:47 EST 2007

Hi -

    Punch and die sets: www.precisionbrand.com

I. Reviakine.

> Good afternoon,
>
> I think I can answer precisely your question since I've been working on lipid bilayers tethered on mica during 5 years.
> 1) The 1st thing you have to know is that you must keep your mica sheets in a dry place (for instance a small cabinet with silica gel) otherwise the sheet can easily get polluted or hydrated.
> 2) You have several muscovite mica providers. The 3 best are:
> 	Metafix
> 	EMS (designed at the origin for optical measurements) having various quality from V1 to V5. V1 is the best.
> 	Good Fellow. I especially recommend this last one for lipid bilayers.
> 3) There is only one way to obtain plane and homogeneous mica sheets: use a punch, and only push once and brutally (if you try to do it in several steps, you will damage your disk and the surface won't be homogeneous). Don't try to cut it with scissors or whatever... Those punches are not easy to find. There is a Canadian manufacturer called Newman tools.
> 4) There is only one way to cleave the mica: use a double face tape and cleave it quickly. Then have a look at your tape under light and see if you have a bright homogeneous disk. This might take you one test as well as 50 times, depending on the mica quality. Then you should immediately put the mica disk in liquid since it can be very quickly contaminate.
> 5) Beyond this, you have to master the parameters for fusion of vesicles or Langmuir-Blodgett transfer, but that's another story.
> If this is not enough, feel free to contact me directly or by the forum.
> Greetings,
>
> Alexandre
>   
>
> Alexandre Berquand, PhD
>
> Life Science Application Engineer
>
> Veeco Instruments - Europe
>
> Solutions for a nanoscale world(tm)
>
> Dynamostrasse 19
>
> D-68165 Mannheim
>
> (:     +49 621 84210 69
>
> Fax:   +49 621 84210 22
>
> email: aberquand at veeco.de
>
>  
>
> Registergericht Mannheim HRB 10094 - Geschäftsführer Francis Steenbeke
>
> www.veeco-europe.com
>
> -----Original Message-----
> From: spm-bounces at spmlist.di.com [mailto:spm-bounces at spmlist.di.com] On Behalf Of spm-request at spmlist.di.com
> Sent: Friday, November 09, 2007 10:43 AM
> To: SPM Forum
> Subject: Spm Digest, Vol 40, Issue 2
>
> Send Spm mailing list submissions to
> 	spm at spmlist.di.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://www.veeco.com/library/community_type.php?type_id=2&sub_id=2&tech_sub_id=1
>
> or, via email, send a message with subject or body 'help' to
> 	spm-request at spmlist.di.com
>
> You can reach the person managing the list at
> 	spm-owner at spmlist.di.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Spm digest..."
>
>
> Today's Topics:
>
>    1. mica sheets (Gerard Oncins Marco)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 08 Nov 2007 11:25:33 +0100
> From: Gerard Oncins Marco <goncins at ub.edu>
> Subject: [Spm] mica sheets
> To: "digest <\"\" \">" <spm\"@spmlist.di.com>
> Message-ID: <4732E41D.9000305 at ub.edu>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi everybody,
> I am searching for highest quality mica to use it as a substrate for 
> depositing biological samples (phospholipid bilayers, fatty acids, etc). 
> We have been buying mica sheets for a while but I am not sure which is 
> the best way to cut it into small pieces that fit inside our mmode head 
> (when using a blade the sides of the mica piece flake and it's sort of a 
> mess). Any advice about how to circumvent this problem will be really 
> welcome.
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: goncins.vcf
> Type: text/x-vcard
> Size: 377 bytes
> Desc: not available
> Url : http://spmlist.di.com/pipermail/spm/attachments/20071108/41b2d06b/goncins-0001.vcf
>
> ------------------------------
>
> _______________________________________________
> Spm mailing list
> Spm at spmlist.di.com
> http://www.veeco.com/library/community_type.php?type_id=2amp;sub_id=2amp;tech_sub_id=1
>
>
> End of Spm Digest, Vol 40, Issue 2
> **********************************
>
>
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Spm mailing list
> Spm at spmlist.di.com
> http://www.veeco.com/library/community_type.php?type_id=2amp;sub_id=2amp;tech_sub_id=1
>   

-- 
Dr. Ilya Reviakine
Group Leader
CIC BiomaGUNE
Paseo Miramón 182
Ed. Empresarial C
Parque Tecnológico de San Sebastián
20009 San Sebastián
Gipuzkoa, SPAIN.
E-mail:                  IReviakine at cicbiomagune.es
Alternative E-mail:  ireviakine at yahoo.com
http://personal.cicbiomagune.com/ireviakine/
Office Phone:        + 34 (0) 94 300 53 12
Mobile Phone:       + 34 (0) 67 110 86 62
Fax:                     + 34 (0) 94 300 53 15

Este correo electrónico se ha enviado desde CIC biomaGUNE. Su contenido, y el de cualquier fichero que le acompañe, son confidenciales y de uso exclusivo de la persona física o jurídica a la que va destinado. Está estrictamente prohibida, y puede ser ilegal, la copia o difusión no autorizada de este correo, o de sus documentos adjuntos, o revelar cualquier información que pudieran contener. Si ha recibido este correo electrónico por error, por favor notifíquelo al remitente o contacte con el teléfono + 34 943 00 53 00 y bórrelo de su sistema informático.

Posta elektroniko bidezko mezu hau CIC biomaGUNEtik bidali da. Bertako edukia, eta erantsita egon daitekeen edozein fitxategirena, konfidentziala da, mezuaren hartzaile den pertsona fisikoak edo juridikoak bakarrik erabiltzekoa. Erabat debekatuta dago, eta legez kanpokoa ere izan daiteke, mezu hau edo erantsitako fitxategiak baimenik gabe kopiatzea edo zabaltzea, bai eta bertako informazioa besteri jakinaraztea ere. Mezu hau zuretzat ez bada, adieraz iezaiozu bidaltzaileari, edo deitu + 34 943 00 53 00 telefono-zenbakira eta ezabatu zure ordenagailutik.

This e-mail is from CIC biomaGUNE. The e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised dissemination or copying of this e-mail or its attachments, and any use or disclosure of any information contained in them, is strictly prohibited and may be illegal. If you have received this e-mail in error, please notify or telephone + 34 943 00 53 00 and delete it from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://spmlist.di.com/pipermail/spm/attachments/20071110/3362d3a1/attachment-0002.html